Trailer Tracker Installation Guide
The RouteMate Trailer Tracker is designed specifically for trailers. It ensures continuous monitoring for up to 3 months even when the trailer is detached, and integrates seamlessly with additional sensors for cargo condition tracking. The Trailer Tracker connects to the trailer’s ABS and receives constant power.
Note: Set up and configure the device in the RouteMate web app before mounting it. Contact your fleet manager or the RouteMate support team to add the device in the web app settings.
Device Overview
Section titled “Device Overview”- Robust design for harsh environments.
- Multiple power options.
- Advanced sensor integration (temperature, humidity, door).
- Extended battery backup — up to 3 months of detached operation.
The web app includes an activity log that records who performed which command, giving you full transparency and accountability over admin actions.
Warranty: The tracking device comes with a 1-year warranty.
Inside the Box
Section titled “Inside the Box”- Trailer Tracker
- 18-Pin Harness
- Mounting Bracket
- Serrated Flange Nuts (×4)
- Flat Head Screws (×4) — optional
Power Source
Section titled “Power Source”Permanent Trailer Power — direct connection to the trailer’s electrical system.
Device Setup Steps
Section titled “Device Setup Steps”Select a Mounting Location
Section titled “Select a Mounting Location”Before installing the device, choose an appropriate location following these guidelines:
- Ensure proper sticker orientation — the side with the sticker should face the sky for optimal GPS and network signal reception.
- Securely attach the device — mount it on a stable surface to prevent it from falling.
- Avoid signal interference — do not install the tracker under metal surfaces or in enclosed areas that may obstruct signals.
Mount the Device
Section titled “Mount the Device”- Attach the mounting bracket to the selected surface.
- Secure the device to the bracket using the provided screws.
- Verify the LED indicators (see table below).
LED Indicators
Section titled “LED Indicators”| LED | Status | Device Status |
|---|---|---|
| CEL LED | Slow flashing | Device has registered to the cellular network. |
| GPS LED | On | GPS chip has acquired GPS info. |
| POWER LED | Fast flashing | External power in, internal battery charging. |
| POWER LED | On | External power in, internal battery fully charged. |
Optional Sensors
Section titled “Optional Sensors”Important: Sensors must be turned on before mounting.
Temperature and Humidity Sensor
Section titled “Temperature and Humidity Sensor”The temperature and humidity sensor can be installed anywhere inside the trailer based on customer preference — front, middle, or back of the trailer.
- Configure temperature thresholds in the RouteMate app.
- Set alert notifications for critical deviations.
Door Sensor
Section titled “Door Sensor”The door sensor must be placed in two parts:
- One part attached to the door.
- The other part attached to the top frame beside the door.
To verify correct installation: the green light on the main unit should flash when the door opens or closes.
Need Help?
Section titled “Need Help?”See the Contact page to reach the RouteMate support team.
Related Pages
Section titled “Related Pages”- Device Management — Manage devices in the web app.
- Asset Tracking — View tracked trailers and assets on the map.
- Managing Assets — Add and assign trailers in the web app.